Toyota Nation Forum banner

Bfg at 285?

1453 Views 3 Replies 4 Participants Last post by  06redtacoma
I have used the search feature, but I can’t find the specific answer im looking for. What do I have to do to fit 285/70R17 BFG AT on my 05 TRD sport on the STOCK RIMS? I have 5100’s and an AAL can I just add wheel spacers to clear the UCA or will I rub the sh!t out of my body mount? I already took off the mud flaps and I don’t mind cutting plastic. Thank you for any help
1 - 4 of 4 Posts

· Registered
Joined
·
41 Posts
Call up Burtman Industries. I picked up a set of Spidertraxx wheel spacers from him and my 285's fit fine. I have the exact same set up as you. Zero issues with the spacers and I have almost 11,000 miles on my l lift.
 

· Registered
Joined
·
46 Posts
i also removed the sway bar, in normal driving conditions you will not need to trim the body mount. i can turn lock to lock at full flex with no rub. i really have a thing about rub. but for normal driving its not needed. just some plastic.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top