[matt86]

Does anyone have any pictures from the DIY for the black headlight mod? I'm thinking about doing it but the Thread linked from the sticky has red x's where the pics were. Thanks

 

[Rodge]

Does anyone have any pictures from the DIY for the black headlight mod? I'm thinking about doing it but the Thread linked from the sticky has red x's where the pics were. Thanks

The pictures on that thread really didn't provide much more help than the guide itself already did.

What exactly were you looking for? Are you unsure about something and need a picture for visual varification?

 

[tooblutacoma06]

Just follow what's written and use common sense. You'll be alright:thumbup: It's a pretty simple mod as long as you take your time and be careful with it. Just make sure you get it sealed up nice and tight.

 

[mjonags32]

here's the CT write up on clear corners. same thing, but without the painting

http://customtacos.com/tech/index.php?article=223

 

[matt86]

Thanks for the help everyone... I'm kind unsure about doing it because the headlights are $$$$$$$. Thanks again!

 

[mjonags32]

Thanks for the help everyone... I'm kind unsure about doing it because the headlights are $$$$$$$. Thanks again!

my advice, TAKE YOUR TIME. thats your best bet. good luck

 

[brny67]

Just follow what's written and use common sense. You'll be alright:thumbup: It's a pretty simple mod as long as you take your time and be careful with it. Just make sure you get it sealed up nice and tight.

what he said...i did all that and I still am dealing with condensation in my lights I have already taken them out once since the original mod.

 

[redinterceptor]

Search for novataco's write up when he did his bhlm. He took lots of pictures and wrote a very good description, too.

 

[novataco]

Search for novataco's write up when he did his bhlm. He took lots of pictures and wrote a very good description, too.

I think its about page 4 on the blk hl mod thread, if you look a little deeper. Maybe between post #40 and #50, and I think on my cardomain site. If you search I think I also had my own thread about it, but can't quite remember.

I went by the pics for the clear h/l mod when I did mine, because I did both clear and black h/l at the same time

 

[blackhawke88]

Most important thing is getting silicon sealant from homedepot and really so a good job of sealing the whole thing. The whole mod took me and my roommate a whole weekend cuz we were lazy.

 

[beastbluetaco]

I have some pictures I can give to you. Hopefully this will help;

In the oven:

Just pulled apart:

Housing out of lens:

Relfectors out: