Toyota Nation Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
I want to put a bull bar and lights on my 2018 Tundra TRD 4x4 Sport. Westin tells me I can not do that because it will interfere with the dynamic cruise and collision sensors. I want to keep both working but still want a bull bar.

1) Is what Westin says true or just fear of liability?
2) If so what solutions have you guys come up with?
3) What bars do work with the sensors?

Thanks
 

·
Moderator
2015 4 Runner SR5
Joined
·
3,691 Posts
Welcome to the site RB!


I don't explicitly know the answer, but what they are saying makes sense. The bar may block the sensors. I bet you could mod them and move them outwards, but the dynamic cruise...eek. I'd be careful.
 

·
Registered
08 Toyota Camry 2AZ-FE R9K Tuned
Joined
·
5,394 Posts
The only thing I see happening is:
  • Look for a different manufacturer
  • Adapt it so that they work
  • Give up the sensors
  • Give up the bull-bar
 

·
Moderator
1998 T100 SR5 2WD
Joined
·
13,604 Posts
I would say to remove the sensors and mount them on the bull bar and extend the wiring harness to match. ;)
 

·
Registered
Joined
·
13 Posts
Discussion Starter #6
1 - 6 of 6 Posts
Top