Toyota Nation Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
86 Posts
5SFE I presume. What error codes are being output? I usually put the diagnostic system into test mode, ign off, jump TE2+E1, turn ign on, jump TE1+E1 (IIRC), drive car around until check engine light comes on, read code(s). Diagnostics are more sensitive in the test mode, good way to troubleshoot any problem.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top