[Cue]

Hi guys I have a 2004 sequoia and I recently purchased a grease gun and some synthetic grease. I found the joints on rear diff side on shaft, and on transfer case side and front diff side. I think there were 6 of them. Are there any other joints or points where I need to grease up. ? I didn’t find the fittings on front joints maybe they are not serviceable.

please let me know any info would be helpful.

 

[SgtScrounge]

Inside the U-joints. Front ball joints, tie rod ends, and/or swaybar end links may have grease nipples. Also, make sure you get the slip yoke on the drive shaft.