Clear corner install help
1 - 10 of 10 Posts
Lolrax said:
to ensure a quality installation of your corner lights, see some professionals that works on it. they do know how, and so to give you the convenient feeling too of having the right installation of it.for sure, it won't ruined your ride..see some infos too about corner lights from this>>>>http://www.partstrain.com/ShopByDepartment/Corner_Light/TOYOTA
Thanks for the link but I have already purchased clear corners.. the part has one screwhole on it and looks to be basically plug and play. I just need someone to point me in the right direction, I have done a lot of DIY work on previous cars but I just got this toyota
Ok. Slowly unscrew the only screw that keeps the lense in its place. (Use the clear lense as a guide to indicate which of the two screws to unscrew)...
You know, this would be much easier if I explained it to you over the phone and if you were by the vehicle....it would also decrease the possibility of you breaking the lense.
Please email me at [email protected] and we will exchange phone numbers.
I also have pics of my installed clears to serve as proof that I swapped the lenses.
Thanks
Robert
You know, this would be much easier if I explained it to you over the phone and if you were by the vehicle....it would also decrease the possibility of you breaking the lense.
Please email me at [email protected] and we will exchange phone numbers.
I also have pics of my installed clears to serve as proof that I swapped the lenses.
Thanks
Robert
Joined
·
3 Posts
Sorry to jump on your thread, but where did you find your clear corners
That user hasn't logged in for nearly 12 years. I doubt they will answer.
1 - 10 of 10 Posts
Join the discussion
Recommended Reading
-
Key fob won't program after locksmith made new key
Sequoia ForumWe were stuck out of state and lost our keys. A locksmith was called and after a very laborious process and a couple of hours made us a new key. When we got back home I went to the dealership and had them make me two new keys and order two key fobs. When I took it in today to have the key...- 5
- 74
-
SequoiaMomVA · updated
-
1st gen reverse lights stuck on
Sequoia Forum‘03 4.7l v8. My reverse lights are stuck on. I’ve seen on other Toyota models they have used a mechanical switch mounted directly to the transmission to control the reverse lights. Did they do this on the sequoias as well? If so, anybody got a part name/number for me? Should be an easy fix if I...- 3
- 300
-
2uz-fe coolant on spark plug tube
Sequoia Forumjust bought 2001 toyota sequoia 218k miles did spark plug change and saw residual coolant droplets on cylinder 7 spark plug tube seal, oil looks good, doesnt overheat, has cylinder 7 and cylinder 5 misfire (adjacent cylinders), ignition coils are tested good, no external leaks anywhere, i know...- 1
- 44
-
jake_teq616 · updated
-
LEAK IN BACK OF ENGINE NEAR INTAKE
Sequoia ForumHello and thank you beforehand for your time and efforts! VEHICLE: 2003 Toyota Sequoia 4WD 8 Cylinders T 4.7L FI DOHC WHAT: There seems to be a coolant leak on the back of the engine right where the intake manifold is on the driver side. QUESTION: Is this common? What could it be? How serious...- 0
- 35
-
phone holder
Sequoia ForumWhat is the best iPhone holder/charger for my 2012 Sequoia Limited? I tried one that clips into the vent but it is worthless. Maybe one that goes into the CD slot? Thanks for any suggestions.- 0
- 56
Join now to ask and comment!