Toyota Nation Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi Guys,

I´m helping a buddy with his 1995 Corolla. He recently put a new engine in and the car is not starting. Checked all 4 injectors with DVOM, threshold I believe is 13.4-14.2 ohms,all 4 were within that range. Also put a noid light on all 4 harness while cranking and light is not coming on. I did not have a chance to look at the crank position sensor, also checked efi relay for continuity and relay is working as it should. I´m stumped on this one,any input is appreciated.
 

· Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
We decided to go down the line on the components that are part of fuel delivery namely:Circuit Opening Relay, EFI main relay,Fuel pump pressure.

Before we started I decided to have another look to make sure we had connected everything from the main harness. Turns out the ground on the side by the starter was not connected. Took out the starter,connected the ground and voila, the rolla started right up






 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top