Toyota Nation Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter #1
I have the 3" toytec lift and I just checked my coils to see which ones I had. I have the 884's is this right? It seems like most of the double cabs have 885's. I just want to make sure that if I put a winch or aftermarket bumper the front wont sag to much. The ride seems ok and I have driven it like this for six mounths. I also have a cap on the back if that makes any differance.:confused:
 

·
Registered
2006 Tacoma 4x4
Joined
·
91 Posts
As far as I know... Toytec now includes the 884's for all their coils unless you request the 885's. Previously, they recommended the 885's for double cabs, especially if you planned to add a winch/aftermarket bumper.

I may be wrong... but I'm sure someone one here will correct me if so!
 

·
need to find money tree
2005 Tacoma
Joined
·
1,978 Posts
ya you will definitley want at least the 885s if you have a DC with aftermarket bumper and winch
 

·
Registered
2006 Tacoma TRD SP
Joined
·
110 Posts
Or maybe even the #886 coils?
 

·
Official Newb
2006 4x4 Tacoma TRD
Joined
·
1,210 Posts
for no bumper or winch you want 884. for bumper or winch you want 885. for bumper and winch you want 886.

honestly thought, if you'll be running a bumper and/or winch, you should buy some coilovers
 

·
Registered
Joined
·
24 Posts
Discussion Starter #6
Thanks I guess I will live with the 884 untill I get a winch and bumper. Then if it sags alot I will get the 885's.
 
1 - 6 of 6 Posts
Top