Toyota Nation Forum banner

Driver Side Mirror and assembly

1543 Views 3 Replies 4 Participants Last post by  havosoki
Have 1998 toyota camry 4 cylinder.
Driver side mirror and assembly got knocked off.
How does one replace it? Can it be done by self?
Could not find it in the DIY section.
Any link or input?
Thanks....
1 - 4 of 4 Posts
It's quick and easy!

On the inside of the door, opposite the mirror, there's a black plastic triangle. Pull on it from the top corner, it'll snap out. That gives you access to three nuts. Remove them (10 mm) and then the mirror should pull out from the outside. If they're power mirrors, then there's a connector you need to unclip, but it's painfully obvious.

Hope I helped! I can get pics tomorrow if you really need.
Where can I buy a matching drivers side mirror replacement for my 1999 Camry LE 4 cyl in Blue Dusk Pearl - Toyota Color Code 930? I want a factory original, can someone advise?

As noted install looks pretty simple. Would like to do it myself, but need the same part.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top