Toyota Nation Forum banner

engine hood

1411 Views 8 Replies 7 Participants Last post by  SGMTurbo
I just got my mr2 turbo yesterday and my engine hood wont come open. I pull the latch behind my seat and it makes the niose but theres no movement on the hood. could someone please help.
1 - 9 of 9 Posts
lol it happen to me when i got mine i was like wtf!!
hey bud im new to toyotanation. im a member on honda-tech.com

I have the same problem with my 92 nonturbo. say i open the engine lid like 5 times. 2 out of the five times it won't open. so i just push the hood a little right at the latch and it will open then. my friend with a mr2 turbo 1991 his doesn't even open though
On the corners of the lid are little rubber "spring screws."
Simply loosen them a little bit to get more spring from your engine lid.

Easy fix :)
once i get my mr2 back i will do that. thanks for the info
JekylandHyde said:
On the corners of the lid are little rubber "spring screws."
Simply loosen them a little bit to get more spring from your engine lid.

Easy fix :)

What he said! :thumbup:
JekylandHyde said:
On the corners of the lid are little rubber "spring screws."
Simply loosen them a little bit to get more spring from your engine lid.

Easy fix :)
You mean I've been karate chopping my hood for no reason all this time! lol :hammer:
Hi all, new member here.

I have a '91 Turbo with 125,000 km.

It has been in the garage for a couple of years and i have just started to get it ready for the street again.

Did a search thru the forum for my latch problems and this came a little close.

Had a little difficulty getting my front hood and engine cover open....now I can't get them to close. Lubricated the latches and they aren't seized, still no luck getting them to close.

Are there any adjustments that can be made to the latches?

Thanks in advance, Steve
See less See more
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top