Toyota Nation Forum banner

Front axle parts

1368 Views 9 Replies 5 Participants Last post by  fourwd1
I am replacing rotors on my '87 4wd. I am looking for parts for the Aisin hubs (cone washers, gaskets) and hub seals. I have searched several sites, but have not found everything I need. Anyone know of a source that has viewable parts catalogs for all Toyota parts?
1 - 10 of 10 Posts
you can buy all that from the dealer (or online dealer) or marlincrawler.com

http://www.toyodiy.com/parts/ to look up parts if you want
See if these don't help you out.

http://toyopartsman.webng.com/data/hub.pdf
http://toyopartsman.webng.com/data/rotor.pdf

Let me know if you need anything or if I can be of help. I do offer TN members 30% off MSRP and I only charge actual shipping costs plus $1.00 - $2.00 for materials, etc.
Warn use to make hubs for the early early Toyota 4wds. Like the 60s and 70s landcruiser and at one time you use to be able to get them for the 79-83 4wd trucks. IMO, I do like them, if you are not going OEM.
The Warn hubs are not nearly as good as the ASIN hubs that Toyota uses.
For one thing, they don't use those darn cone washers, and come loose.
in this case oem is very hard to beat !!!!
Speaking of rotars....I read 93 rotors and calipers will fit on 85s both have to be 4x4s though...anyone know ?
Yes and no.
The calipers will fit, but only with mid-80's LC rotors.
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top