[bilalk]

I am trying to install new neons in my camry and i want them to turn on when my headlights turn on so i am trying to find the fuse location and tap into that. I took off the cover and i dont know the word for the headlights. There's Panel 7.5A, Tail 15A PWR 25A and all sort of diffrent kinds of things where can i find the headlights one?

Thanks

 

[tengiday]

Read the below link and delete this post before Njerald says "SEARCH..." or "READ...."
http://www.camrystuff.com/manuals/Gen6/Miscellaneous/07EWD.pdf

 

[crazyaznman]

should be LL for low lights

 

[bilalk]

there is no LL on the panel where it shows. It only shows Panel, TAIL, S/ROOF/ Door No.2, PWR, A/C, AM1, TI&TE, STOP,ECU-B No.2, OBD, FR FOG, FUEL OPN, RR DOOR LH, RR DOOR RH, MIR HTR, RADIO No.2, PWR outlet, CIG, ECU-ACC, Gauge No.2, IGN, INJ, H-LP LL, WIP, GAUGE NO.1, S-HTR, WASH,A/c No.2, ECU IG NO.2, and ECU IG No.1 which one is the headlight one.. and in the manual if it shows what page number?

 

[njerald]

Don't believe smartass noobs.....and I guess you have problems reading your Owners Manual.

Fuses 24 and 25 in the Engine compartment are low beam headlight fuses............

 

[bilalk]

I looked through the manual can i use the fuses ECU-ACC or GAUGE NO.1 headlights are listen under those. Which fuses can i use?

 

[TedL]

I believe you listed H-LP LL, as in Headlamp-Lowbeam-Left

 

[bilalk]

what do low beam mean... is it when all the headlights are turned on or just the parking lights or something.

 

[TedL]

You're kidding, right? Low beam and high beam are unfamiliar to you in the context of headlights?

If serious, it's time to read your owners manual, or one from any car made in the last sixty years, which will explain headlights.

 

[exclusive]

This should help. Not my pic. If you are not using a fuse tap, and just want to tap another way, tap only on the left side.

 

[bilalk]

wow man thanks that helped so much. what fuse should i put in the second slot of the fuse tap. can i put another 15A one? because i have spare fuses that came with the car its a 15A and a 30A which one can i use?

 

[bilalk]

i have a problem i tried installing my neon lights no luck.. my fuse add a circuit fuse holder wont take any of my fuses.. i try adding the 15A fuse to the add a circuit but its not fitting into the socket is that why its not working and what fuses should i buy?\

this is the one i bought

[ame]http://www.amazon.com/Pico-0956PT-Mini--Circuit-Holder/dp/B001QRSBW0/ref=sr_1_2?s=gateway&ie=UTF8&qid=1285713129&sr=8-2[/ame]

 

[njerald]

If you don't know what you're doing have someone who knows, do it for you....

 

[exclusive]

Mini fuses will fit. However, the fuse tap you bought is rated for 10A, not 15A.

 

[bilalk]

so should i change the fuse or the fuse tap.. where can i find a fuse tap that fits into my car 07 camry.. i tried everything i even ordered a new fuse tap i tried it today and still no luck my fuses wont fit into the fuse tap.. what fuse tap should i buy??

 

[scamry]

i would say take it to someone who has a reasonable knowledge of cars. no offense, but you do not.

maybe they can explain to you the functions of low-beam, high-beam, blinkers, etc...

why in the world would you want neons to come on whenever your headlights do? i guess the bigger question at hand is why in the world do you even want neons?

 

[bilalk]

can you just tell me what fuse taps i need to buy for my car rest i can do it on my own!

thanks

 

[exclusive]

I just made my own. Take a maxi fuse (the normal sized ones cars used to have) and break it apart. Cut it in half, and trim the thinner end to fit into the fuse slot. You will need to hammer it down to make it thin. Don't mess with the bigger end. It will stick out and you can put a connector on it.

Basically you are making this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200519215736