Toyota Nation Forum banner

1 - 2 of 2 Posts

·
Working hard?
91 |4 camry
Joined
·
376 Posts
Discussion Starter #1
Gday
I was wondering how i could take the door of my 91 camry....
i am only interested in the front doors and have had a look but can only find a few screws- in the door handle, the thing you grab to close the door and a couple that are exposed... any help in taking of the inserts would be great as both of them rattle when the windows are down
 

·
Grenaded piston
Joined
·
6,594 Posts
1. Remove screw in door handle. Push the whole thing forward and pull out. Reach behind and undo the clip holding on the metal rod.

2. Remove the 2 screws on the other handle (the one you grab to close the door).

One of the screws in the upper corner of the handle underneath a cover. Pry out the cover and remove the screw.

The other screw is on the bottom of the handle/armrest. Pop off the cover and remove the screw.

3. Remove the 2 screws on the front of the door panel. Their underneath little round plastic covers.

4. Remove the plastic triangular piece from the corner of the window (it covers the screws for the side view mirror).

5. Pull on the bottom of the door panel (theres a bunch of clips).

6. Grab the panel and lift up.

7. Unclip any wiring behind the door panel.
 
1 - 2 of 2 Posts
Top