Toyota Nation Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
Whats a good place to get upgrades for a generation 3 camry? (Anything really)
 

·
Turbo-Yota power
Joined
·
1,774 Posts
I would not say that cause here in quebec we got lots of custum shops and performance shops to tune and build up any car.http://www.zekeauto.com/ these guys i know are doing 2- 240sx to Silvia s13 conversions right now so they know there stuff.
 

·
Registered
Joined
·
22 Posts
Discussion Starter #4
I live in Los Angeles, California. Anyone know of somewhere good?
 

·
Sweet n' Lowdown
Joined
·
16,189 Posts
Check w/ http://www.teamsc3.com they will know ...they are the Southern California Camry Club after all! EL Prototypes is a good shop to start with, they custom fab a lotta Camry stuff for TeamSC3 (ie CAI's, Catbacks, 5s-fe turbo, 3s-gte swaps...
good luck
L8s.
Eric
 

·
Registered
Joined
·
76 Posts
Hey guys, this is my car....what kind of engine (5S-FE... etc) is this and how can i upgrade it ?!?! Like i saw some cars like mine with changed headers, etc....i wanna make it faster :smile:
 

·
Registered
Joined
·
76 Posts
Hey guys, this is my car....what kind of engine (5S-FE... etc) is this and how can i upgrade it ?!?! Like i saw some cars like mine with changed headers, etc....i wanna make it faster :smile:

http://dogwood.phpwebhosting.com/~epcsale/car/CAR00536.JPG
 

·
Turbo-Yota power
Joined
·
1,774 Posts
1mzfe the same engine as my car for now the only thing you can get for it is a supercharger and some custum headers and exhaust.I would recomend some iridium spark plugs and a custum cat back exhaust cause they are a proven Hp gain.
 

·
Registered
Joined
·
76 Posts
This is a '95 V6, so it will take some effort to install a S/C on that engine. I will need some help, because i'm not extremely car-literate :smile: As for headers, i don't know of any places in Boston that can make me a custom header. Can you recommend me a manufacturer who makes catback for my car, and also where i can get iridium spark plugs ?
 

·
Registered
Joined
·
76 Posts
Hey,

What is a realistic HP i can get off my '95 Camry V6 Auto ?! I wonder how much money i will have to spend to make it a 14sec car :smile:
 

·
Registered
Joined
·
1,945 Posts
Do you know what your car is in hte 1/4 mi stock? I think its in the high 15s... so basically you are looking to lose a second. I would say, start with the smaller things like intake, headers, exhaust. Then you could look into other things like modifying or reprogramming ECU, advancing timing, smaller/ligher pulley, etc.

Or if you trust the s/c install, go for that... that along with i/h/e will give you the 14s that you want.


On 2001-09-06 16:06, Ice wrote:
Hey,

What is a realistic HP i can get off my '95 Camry V6 Auto ?! I wonder how much money i will have to spend to make it a 14sec car :smile:
 

·
Registered
Joined
·
76 Posts
The thing is that where i live (Lynn, Massachusetts) there are alot of asians and spanish teens with civics/accords/integras. And i just hate seeing the being able to rip me appart without really trying :smile: They all drive on hooked up cars.....and most of them are bolt-on add-ons too....i want to be able to show them who's da king :smile:
 
1 - 12 of 12 Posts
Top