HELP!!91 V6 won't start after getting to norm temp

889 Views 4 Replies 3 Participants Last post by 91CAMV6, Jul 7, 2004

91CAMV6

Discussion Starter · Jul 6, 2004

91 camry V6/auto

starts fine when cold but after getting up to normal operating temperature and getting shut off it will not start(still cranks and turns overbut will not fire up) unless you wait 10,15 or 20 minutes.

ANY Ideas?

Thanks

Save

1 - 5 of 5 Posts

cam2Xrunner

· #2 · Jul 6, 2004

Ignition coil maybe?

Save

91CAMV6

Discussion Starter · #3 · Jul 6, 2004

I know that either the ignitor or coil was replaced previously-i'll check.

Has anybody heard or had such a pain in the a$$??

Save

eviltwin67

· #4 · Jul 6, 2004

My 96 V6 has started to do the same thing. It happens so intermitently that it won't do it for my mechanic. When it does do it, it sounds like what you described is happening to yours. Let me know how you fix it. Good luck.

Save

91CAMV6

Discussion Starter · #5 · Jul 7, 2004

the coil is new along with wires, plugs, cap, rotor, belts, radiator etc.

I was driving it today and it did it again like clockwork. The I drove it again and it started?!

Does this sound like a vapor lock?? It's not getting hot-just normal temp.

Thanks

Save

1 - 5 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month