Toyota Nation Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
6 Posts
Discussion Starter · #1 · (Edited)
GEN6




Good day .
here my history - I live in the Europe, 2 months ago have ordered wheels from the USA... 19/8.5 +38

Today have brought wheels.... And they are STAGGERED :sosad::sosad::sosad:

19/8.5+38 F and 19/9.5+30 R


Tell to me please, whether I can establish this wheels without wiping??? The car is lowered and tires are 245/35 falken FK452
:sosad::sosad::sosad:

What would you make on my place??? It is necessary to try to put? Or to sell?
:sosad::sosad::sosad:

Very sory for my English....
 

· instant noodle FTW
Joined
·
239 Posts
my rims are 20x8 +35 & 20x9.5 +30, i dont have rubbing problems yet since im not yet lowered, but i think I should be able to clear the fender since im using 225/35/20 on the 9.5. I suggest you change your tire to 225/35/19, dont be scared of the stretch, 225 is still fine wont get you into trouble, and dont forget to roll the fenders, if needed pull the fenders slightly, im sure theres a workshop in your country that can do fender pull without damaging the paint on your fenders

Nice going with the staggered setup, btw what brand of rims did you get?
gluck
 

· Registered
Joined
·
6 Posts
Discussion Starter · #3 ·
my rims are 20x8 +35 & 20x9.5 +30, i dont have rubbing problems yet since im not yet lowered, but i think I should be able to clear the fender since im using 225/35/20 on the 9.5. I suggest you change your tire to 225/35/19, dont be scared of the stretch, 225 is still fine wont get you into trouble, and dont forget to roll the fenders, if needed pull the fenders slightly, im sure theres a workshop in your country that can do fender pull without damaging the paint on your fenders

Nice going with the staggered setup, btw what brand of rims did you get?
gluck
Can You post photos of your rims???

and about my rims....

Arospeed GBX5 like this http://cgi.ebay.com/ebaymotors/19-A...011QQitemZ320159410299QQrdZ1QQsspagenameZWD1V
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top