Toyota Nation Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I was mucking around near my alternator contacts and blew the main fuse that protects the ignition. It lives in the fuse box next to the battery (truck's an 86 4x4 w/ carb). It's a black square fuse with a clear window. So I'm trying to pull it straight out but it won't come out. There's a green and a red fuse next to it that look the same and pull straight out - no problem. How do I get this 80 amp out?- there's a tab- looks like a release tab and I stick a screw driver in but it still won't budge. Also, is this fuse available at the local Napa or is it dealer only?
 

·
NY born, Texas raised
Joined
·
705 Posts
It is held in with screws at the bottom. Unbolt it from the wall and roll it over. Yes, NAPA has the fuse. I know, '86 4runner EFI. I tore mine up before finding out about the screws.:hammer:
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
I'm about at that stage..

thanx for the info! I'm was about at the `hack' stage before I forced myself to calm down and take stock..
 
1 - 3 of 3 Posts
Top