Toyota Nation Forum banner
1 - 1 of 1 Posts

·
Registered
Camry
Joined
·
6,925 Posts
Arc Audio SE 2300

If you take one voice coil from each sub and wire them parallel to each other then wire the other voice coil similarly, you will have two 2 ohm loads which you can then use as 1 ohm or 4 ohm loads when you put those two 2 ohm loads together.

The Arc Audio SE2300 will put out 1300W RMS @ 4 ohms so you'd get at least 433W per sub since Arc amps are under rated.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top