[BABU]

Hi i have a 2004 Toyota Corolla 1.4 i removed the bonnet cover to get access to the washer nozzle there is no access to the nozzle just a small hole underneath. Very unlikely to get long nose pliers in their to release tab. Is there anyway to remove nozzle from the outside top of bonnet

 

[BABU]

Picture of cover removed small hole only
No.access

 

[75aces]

The easiest way is to use a needle nose pliers. There's tabs on either side of the nozzle. Pinch and push up, or pinch and grab from the top.

 

[BABU]

Hi 75aces

Thanks for reply so do i use a needle nose pliers through the hole to release tabs to get nozzle out from top. Or a flat face screwdriver

 

[75aces]

I would use the opening in the hood rather than the thru hole. Only, because it's more access.