Toyota Nation Forum banner
1 - 3 of 3 Posts

·
Bullitprooph
1986 MR-2 N/A, 1991 Celica GT-S, 2005 Matrix XR, 2009 Matrix XRS, 2009 Matrix Base
Joined
·
1,504 Posts
You definitely want to get a Haynes or Chilton's manual from Pep Boys or Autozone (or the library, for that matter) before you do this yourself.

The interior trim has to come off of the door, then the window has to be removed (the bottom of the window sits on a tray which is actuated by the window regulator). Once the window is out, disconnect the wiring harness from the regulator, and remove the 3 or 4 bolts holding the regulator assembly to the door frame. Then slide the assembly out of the door and replace with the new one.

All the instructions are in the manuals, with pics to make it easier...
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top