Toyota Nation Forum banner
1 - 8 of 8 Posts

·
camry noob
Joined
·
10 Posts
I just did a ghetto install...
I got this pioneer unit from ebay for $30... There was a crack on the rear of the faceplate, so I carefully glued it and put under a lamp to dry..
Which I shouldn't have, because IT MELTED!!
I then cut off a piece that melted, and now the faceplate is held in place by a screw..
:D
Also I didn't have a harness, so I hooked the wires straight to the connector...
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top