Toyota Nation Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
238 Posts
Discussion Starter · #1 ·
To remove. I heard that all the manuals procedures are wrong saying use an ordinary 2 arm puller, I tried a 5 ton until the threads on it were a little shot and the puller wants to twist off the arm. Some say the control arm has got to be taken off heated until red hot then use a hammer on it which is what the manual says not to do!

I also noticed that Toyota likes to sell the arm and ball joint as one unit saying they won't sell just the bushings.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top