Toyota Nation Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1 (Edited)
Hi guys, I need info on the tubes so we can properly connect it to the sensor. There is no air coming out when you remove the tubes from this sensors. Is it normal? Pictures will be greatly appreciated.

I got an idle drop when i engage my A/C. And i got trouble starting the car (I need to give gas to get it start these usually happens on cold start). Am thinking these could be the culprit. The car will ran fine after start.

http://i1113.photobucket.com/albums/k501/neodagzph/xxxRav/2012-08-27193028.jpg

(Picture is too large)

Thanks very much guys.
 
1 - 1 of 1 Posts
Top