Toyota Nation Forum banner

261 - 280 of 303 Posts

·
all my heros are evil
camry
Joined
·
805 Posts
Running Motegi MR7's 17" w 215.R45's on my gen3. Stock suspension for now. Only rubbing issues in the back when two people in back seat and trunk is fully loaded.
 

·
1MZFE Marauder
'01 Solara SLE
Joined
·
150 Posts
Sporting Work Meister S2Rs (Last brand new set sold by WORK in the world)
18x8.0 ET+37 front, ET+27 rear (10mm Ichiba spacers in rear; Eibach camber kit in rear as well)
Solara is on Tein S-Techs/Tokico HPs
Rubbed like a motherf***er in the rear prior to fender rolling.

 

·
Registered
2003 Toyota Camry LE
Joined
·
45 Posts
Old wheels:

20x8.5 Cabo (lowenhart ripoff)3.5" lip tires: 225/35 Nitto NeoGen 35mm offset, dropped on S. Tech springs (1.75 front 1.5 rear) Rubbed too much with passengers in the rear, had to ghetto-roll fenders


New Wheels:

18x8 SSW 45mm offset no lip, 225/45 Falken ziex tires, No rubbing at all
 

·
Registered
Joined
·
31 Posts
So I just read and scanned through all seven pages and I still don't know what the widest wheel that will fit is and the offset that would allow it would be for a Gen 3 Camry with a 5SFE?

Someone stated that you could fit up to a nine inch wheel in the front with the right amount of camber. Nobody said what degree of camber would be required though. Also what about the rear? What is the widest wheel you can fit in the rear as well and what offset is best to make the wheels flush to the fender assuming only 1 degree of negative camber or none at all. Also assuming that I wanted to have the same width front and rear what is the widest wheel possible?
 

·
Registered
Joined
·
161 Posts
97 camry i4 ... lowered with tokico hp blues and intrax springs ... springs have been on for over a year now and should be through their 'relaxing' period ...

so basically lowered about 1.6" in the front and 1.5" in the back ...

i have 18x8 wheels +45 offset and 215/45/18 tires all around ...

there is rubbing, especially in the back under really hard acceleration, full trunk/backseat, or hard bumps. i will need to roll fenders in the back at least, probably all around.

the rear wheels are perfectly flush with the fender ... the front wheels are pushed out just a smidgen too far but you cant tell from the pictures ...





 

·
Registered
1995 Vienta Touring
Joined
·
465 Posts
I have 17 x 7 Aurion ZR6 Rims on my 95 Tourer Camry. They have a +45 offset using 225 or 235/55/R17 tyres... Fits snug. Wrong profile height for the Cam, but hasn't changed the speedo reading from what I can notice.







 

·
Registered
Joined
·
53 Posts
I want to put on some new wheels on an 07 Camry. I am looking at some Volk Wheels 18 x 7.5 +42 offset. The car is not lowered at the moment. Will these fit on the stock suspension? Will they cause any problems with some TRD springs?

Please let me know, I have been away from this forum for years. Be nice :)
 

·
Registered
99 Camry LE
Joined
·
1,776 Posts
well i just went through this entire thread and didnt come up with anything to fulfill my question. I was trying to find Milts gen 3 wheel size went he went crazy on width, but no luck...so my question is

will....

18x8+48 wrapped in 225/45-18 (front)
18x9+50 wrapped in 245/45-18 (rear)

work on a gen 4?? [highest offset on the thread was 50 but with <=7" width wheels...]
 

·
[g4.Rep]
1999 Toyota Camry LE
Joined
·
1,591 Posts
18x8 +10 in the back.. LOL!


-----------
18x8 +30 in front..
18x8 +20 at the back..




-----------
17x7 +25 in front
17x7 +20 at the back



------------
17x7.5 +20 in front
17x7.5 +15 at the back

 
261 - 280 of 303 Posts
Top