Toyota Nation Forum banner
1 - 8 of 8 Posts

·
kevin
06,sr5,acab
Joined
·
24 Posts
Discussion Starter · #1 ·
I've been reading threads for about 4 hrs and still don't have a positive answer.I'm putting on a pro comp tree inch lift and bought pro comp 6089 17x9 with 4.75 b/s and 6mm offset will these rub my UCA.Man I hope I don't have as many issues as alot of members.
 

·
Registered
Joined
·
49 Posts
you should not have any rubbing with 4.75" of backspacing on 17x9 rims. I think the extra inch of width will offset the .25" of offset meaning your tire won't 'bulge as much as it would on a 8 inch rim. i assume you will be using a 285/75???
 

·
kevin
06,sr5,acab
Joined
·
24 Posts
Discussion Starter · #5 ·
The reason for the 17x9 is becuase I was told by 4wp who called pro comp that is the size I needed.This is becoming a pain in my a$$ it shouldn't be this difficult to get rims and tires. Tires are 265/70/17 31.7/ 10.6 they rub the flap a little and I don't want to cut anything plus I like the look of the lift.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top