Toyota Nation Forum banner

1 - 3 of 3 Posts

·
Registered
2008 tacoma dbl cab
Joined
·
21 Posts
Discussion Starter #1
so correct me if i'm wrong but this is info. i got from here. 6" basic fabtech lift(no stacking) w/33 on 17x9 can use stock uca or do i need to change uca to lr uca? alignment specs should be camber - 0* and caster - 2.5*? and does the alignment shop set to this spec. or do i have to request this #'s? just making sure i'm on the right track with this.
 

·
Toyotanation
Joined
·
6,972 Posts
Your on the right track. You need to ask them to set it to that specs.

Wether or not you need the UCA's? It will depend. If they can set it at those numbers, or not?

If they can then you don't need UCA's.

If they can't? Then you need UCA's.
 

·
Registered
2008 tacoma dbl cab
Joined
·
21 Posts
Discussion Starter #3
hey toku58! thanks for the reply. is there a specific range setting for the caster or set to exactly 2.5?
 
1 - 3 of 3 Posts
Top