Toyota Nation Forum banner
1 - 2 of 2 Posts

·
V8'sRGone
Yoda's See Sig
Joined
·
1,972 Posts
Discussion Starter · #1 ·
All,
For those of you who have installed an alarm with these options which is MOST FAVORABLE for the Camry and why?

Ride is a 95 V6 LE Auto, Minimum Reqs:

Monitor Hood, trunk, all 4 doors; will disable engine start/run; have remote for pwr locks, glass breakage detection, won't inflict too much damage on factory wiring harnesses.

Please list your model and why you choose it, cost of unit and maybe cost of install or package.

Thanks in advance.....
/randy
 

·
V8'sRGone
Yoda's See Sig
Joined
·
1,972 Posts
Discussion Starter · #3 ·
Python 460 installed for $200

I was thinking of DIY but sometimes they don't want to give out all the literature required when you buy these things. I got a quote for $200 installed for the Python 460HP.

CCity - has the deal and they do it with a garantee (hehehe).

I am curious what all they have to hack into: Minimum would be the door switch, starter (cut and relay) and ____? I don't know the camry so well.

If you have any thing specific to make sure these guys do a good job let me know. They SAID any splice jobs would be soldered. All cuts would be crimp joints.

This car is an auto - but if you know of a convenient place to actually disable the car from running I would like to do both. Old school stuff, just open the crank trigger (distributor for ignition) and all but the most advanced theives would be clueless.

Thanks for any input....

/Randy
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top