Lowered 08 SE but....

yes it is normal.
if you check the website of EIBACH, the drop is 1" for the Front and 1.4" for the rear

Someone didn't do their research. :lol:

yup thats normal only way to get it even is coilovers

hm.. ill wait for TEIN spring.. First Time with EIBACH..

or get Only Front Spring hehe

Have you considered the H&R springs?

Epsilon said:

Have you considered the H&R springs?

Click to expand...

i got a DEAL with EIBACH that y i when to EIBACH ( got it for $2XX ) hehe

ill do the SEARCH for other Spring's wich can mach 1.4 Front Drop..

but EIBACH and TRD are SAME drop rite ?

Someone on TN also mix-matched spring sets to get a more even look for the back heavy hybdrid (he used SE and TRD, I believe). Other option could be Sprint in front and TRD in back, not sure about the handling quality. However, looking at the TRD lowered cars (including mine) the issue appears only a visual effect: The ground clearance of the car is pretty much even front and back and I believe it only looks higher in the front due to the pretty large wheel well...? Maybe that is obvious to all here though? I considered lowering the front more to make it look more aggressive, but I am already struggling on our bad roads to keep the body kit from being damaged.

http://www.toyotanation.com/forum/showthread.php?t=227981&highlight=gen+suspension+thread

lol read up

i have H&R. its pretty even dude. 1.4 rear, 1.3 front.

Epsilon said:

Someone didn't do their research. :lol:

Click to expand...

:lol: shoulda read the drop b4 putting them on

gene112601 said:

i got a DEAL with EIBACH that y i when to EIBACH ( got it for $2XX ) hehe

ill do the SEARCH for other Spring's wich can mach 1.4 Front Drop..

but EIBACH and TRD are SAME drop rite ?

Click to expand...

Yes, TRD and Eibach are the same. No offense, but that price is average for these springs.

http://toyotapartspeople.com/Search...uctdesc=TRD+Suspension+-+Lowering+Springs+Set

http://trdparts4u.com/MC-DBHD-EA.aspx

Tobeit said:

Someone on TN also mix-matched spring sets to get a more even look for the back heavy hybrid (he used SE and TRD, I believe).

Click to expand...

That was me:
http://www.toyotanation.com/forum/showthread.php?p=1807438

I would think doing this same thing on a non-hybrid might cause geometry problems. I essentially "created" a set of matched springs for the hybrid. But the OP would take his stock SE and replace only the front springs with TRD, so his front springs would not match his rears.

gene112601 said:

i got a DEAL with EIBACH that y i when to EIBACH ( got it for $2XX ) hehe

ill do the SEARCH for other Spring's wich can mach 1.4 Front Drop..

but EIBACH and TRD are SAME drop rite ?

Click to expand...

jesus, you type like an idiot.

Epsilon said:

Yes, TRD and Eibach are the same. No offense, but that price is average for these springs.

http://toyotapartspeople.com/Search...uctdesc=TRD+Suspension+-+Lowering+Springs+Set

http://trdparts4u.com/MC-DBHD-EA.aspx

Click to expand...

i know dont worry.. got around 210 shipped...

thx to all for good point..

ill get the H & R spring next month

your front sits higher even more cuz urs is an I4

Netforcer said:

your front sits higher even more cuz urs is an I4

Click to expand...

I totally forgot about that.

Netforcer said:

your front sits higher even more cuz urs is an I4

Click to expand...

Epsilon said:

I totally forgot about that.

Click to expand...

I got an I4 and my front is exactly 2 fingers gap and 1.5 finger gap in the rear.