Toyota Nation Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,474 Posts
I have a SunPro gauge in mine. You should be able to get a metric adapter kit from them or from where ever you bought the gauge. It comes with three (I think) adapters so you will have the correct one no matter what.

Mine came with an SAE thread adapter. I wanted to get it running so I rethreaded it with a metric die "temporarily" figuring I would buy the metric adapter later. It's been on there for a year so far.:D I still keep saying I'm going to buy the correct one then I don't. I guess I procrastinate a little.

In fact, here is a link to it. I think yours is the M10x1.0 to 1/8" but I'm not positive. I can't remember that far back. I guess I'm getting old or I burned out one too many brain cells.

http://www.sunpro.com/product_detail.php?pid=16338
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top