Toyota Nation Forum banner

mod of the fog light mod

1236 Views 4 Replies 4 Participants Last post by  HotRod53
I was reviewing this post http://www.toyotanation.com/forum/showthread.php?t=79485 but think I would rather tie into one of the headlight fuses instead of the 10 amp ignition fuse. I know the fogs should only come on if the headlights are on that way. I want to be sure that my thinking is correct though before I start tampering with things...

Thanks
1 - 5 of 5 Posts
There would be no point in doing the mod then.. the fogs are setup that way already.
^true dat! U can tie em up to ur taillights that way they dont shut off when u flick the high beams but still only turns on when the taillights are on.
^true dat! U can tie em up to ur taillights that way they dont shut off when u flick the high beams but still only turns on when the taillights are on.
That is actually all I was interested in. I just think its stupid to have the fogs turn off when you turn the highs on. What is the point in turning on the brights just to have it cut out other lights...
My 10 minute fog light allows your fogs to be ON any time the parking lights are on AND they don't go off with the high beam.

10 minutes, 4" of wire, 1 spade connector...done!
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top