[99camryLE]

Alright, here's the problem...my mom wrecked her CR-V last week, and the car is non-repairable (she's okay, but the car is totalled). The CR-V had an aftermarket keyless entry/alarm system, which I want to take out and put into my camry. Does anyone know how to take this out of the CR-V and put it into my camry. A DIY, a website, any help would be great. Basically, I've never done this before, so detailed intructions would be preferable. Thanks in advance.

 

[05CamrySE]

you need to locate the brain which will have other wires going in to it its usually a little blck box under the dash. trace the wires all the way back to where they connect to and cut them exept anthing thats not a part of the cars wiring like the shock sensor valet switch led and if its a two way pager ther will be a sensor mounted on the windsheild or dash somewhere you will also need the amp relay for installing it into your car you need to find out from someone on what wires are what on the camry. and if you have the model number of the alarm look for a manual

 

[99camryLE]

Does anyone know of any websites that would help?

 

[05CamrySE]

check out this site. however they do charge

http://www.mobileinformationlabs.com/index.htm?source=adwords