Toyota Nation Forum banner

New guy ???

1273 Views 4 Replies 4 Participants Last post by  BamZipPow
Need help on a engine swap in my 1993 t100 , it has a 3.0 engine and i want to put a 3.4 tacoma engine. It has a auto trans (passenger side drop a340f) with chevy axles. Will the tacoma engine bolt to the trans. Or if anyone has info please help!!!
1 - 5 of 5 Posts
:welcome: to the nation!

I'll move this thread to the T-100 forum as you'll have a higher chance of getting the answer you're looking for :thumbsup:
  • Like
Reactions: 1
You might be better off checking out what's on the internet... ;)

http://www.4x4wire.com/forums/showf...79904&page=1&view=collapsed&sb=5&o=14&fpart=1

;)
  • Like
Reactions: 1
Yes the 3.4 will bolt-up to the 3.0 trans, but there is more involved. You need the ECM and wiring for starters.
If you check OffRoadSolutions old site there is a lot of good info.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top