[xxzero90xx]

Hey dudes I was wanting to replace the stock speakers in my 97 camry since one of them is blown. I wanted to know what size thay are, and whats the biggest that will fit in the stock location? Also how do you guys make room for the bigger ones, are theys placed in the stock location with some custom fabrication or...? The stock head unit has enough power for how much?THNX.

 

[Nomis]

You replacing the front or the back speakers?

 

[triggerhappy007]

6 3/4 in Front, 6X9 in back. Use crutchfield.com to see what fits and pricegrabber.com or ebay to buy them. I would upgrade the head unit too.

 

[nodrogkam]

just to let u know, replacing the speakers is not the easiest thing to do on the camry. You will need to create or buy custom mounts for the speakers so they dont rattle on the door.

Good luck and you can use crutchfield or circuit city to find what you need.

 

[Altarium]

just to let u know, replacing the speakers is not the easiest thing to do on the camry. You will need to create or buy custom mounts for the speakers so they dont rattle on the door.

Good luck and you can use crutchfield or circuit city to find what you need.

what kind of custom mounts are you talking of?

they fit, but mine do rattle, and I'd like to stop the rattling in the front

 

[nodrogkam]

did you mount the new speakers into the existing mounts that the factory speakers were glued onto? I know some people who just screw it in but it causes rattling.

http://cgi.ebay.com/ebaymotors/6x9-...9QQihZ014QQcategoryZ38646QQrdZ1QQcmdZViewItem similar product.

i also had to dynamat my rear deck but now my ceiling trim rattles.

 

[roy7777]

I use the polk audio speaker in the front door of my 96 camry.
They have 6 3/4 inch speaker.
http://www.polkaudio.com/caraudio/products/speakers/6-3-4/
I bought the db6750.
I don't need any mount to install the speaker.
But I could only lock 3 screws on it.
It is still very stable.

 

[Axel Kain]

ive got Kenwood Excelon 6 1/2" oversized, 2 or 3 way's...its been awhile. and they mounted in the stock location, using stock holes, and stock screws, and have NEVER rattled...they help in the vibration of my door, and mirrors, but have never rattled...