Toyota Nation Forum banner

1 - 2 of 2 Posts

·
Triple A Whore
Z06, Camry, Tucson
Joined
·
7,650 Posts
Discussion Starter #1
It's been pretty cold here these past couple of days. I think today's highs are in the low 50's.

I took the car for a drive and turned the heat on but the air blowing out is cold, no heat at all. Tried it for a couple of minutes and still no heat.

Is there a simple and easy solution to this? Please say yes!:D
 

·
Not so Noob now!
Joined
·
561 Posts
If you have the electronic PushButton controls check this thread: Heater control issues

If you don't check to see if your heater control cable is still connected to the valve for the heater core. Pop the hood and look for where the coolant hoses go into your firewall, there should be a valve with a cable connected to it. If you move your heat slider the cable on the valve should move also. There is also a door in the heater/AC box that opens to let air pass over the heater core, if it doesn't open, then you get no heat either.
 
1 - 2 of 2 Posts
Top