Offset gen3

1097 Views 10 Replies 5 Participants Last post by ajmcamry55, Jul 12, 2004

AMScamrySE

Discussion Starter · Jul 9, 2004

Will wheels with a +45 offset stick out too far on a Gen 3??

Save

1 - 11 of 11 Posts

Camrypunker

· #2 · Jul 9, 2004

No, it will be too far in.

Save

AMScamrySE

Discussion Starter · #3 · Jul 9, 2004

CamryPunk said:
No, it will be too far in.

Really...what is the stock offset

Save

ajmcamry55

· #4 · Jul 9, 2004

CamryPunk your camry looks lke it has the 1.8 in drop, what is your off-set on your wheels?

Save

phatboy555

· #5 · Jul 9, 2004

stock i think is 38...you could get away with a 42

i think 45 is pushing it though, but it'd probably work on some...i'd go 40 or 42 though if you have the choice

Save

Camrypunker

· #6 · Jul 9, 2004

ajmcamry55 said:
CamryPunk your camry looks lke it has the 1.8 in drop, what is your off-set on your wheels?

I have the 1.8 drop. My wheels are 18x8 with an 51+ offset in the front and +38 in the rear. They fit without rubbing. They're custom offsets.

Save

the reason why i am asking is because, i have 17 by 7s (+38 off-set) and when i lowered my coupe 1.8 inch the top out side of my tires hits the fender, so i took my rims off, and am going to sell them, i need to know what a good off-set would be for the rims i should get in the near future to replace the +38 off set ones...thanks

here is my ride:
http://www.cardomain.com/member_pag...=25&val=100