Toyota Nation Forum banner

1 - 6 of 6 Posts

·
2010 Camry SE V6
2021 Toyota Camry TRD
Joined
·
3,245 Posts
Discussion Starter #1 (Edited)
Sup guys. I hit a curb the other day at about 15 mph on the right side. Didn't damage the tire. Nor bend the rim. But it had a pull to the right. I put it on the hunter alignment machine yesterday in shop class and everything was in spec EXCEPT for caster. My front right Is off by almost negative 2 degrees and is non adjustable. Would that mean my control arm is bent?
 

·
2010 Camry SE V6
2021 Toyota Camry TRD
Joined
·
3,245 Posts
Discussion Starter #3
i knew it wasnt gonna be long after you got your strut/sway bars
I hit the curb before I got th sway and strut bar. Lol. Only recently was able to look at it
 

·
Cruisin' along
2019 Camry LE
Joined
·
858 Posts
Sup guys. I hit a curb the other day at about 15 mph on the right side. Didn't damage the tire. Nor bend the rim. But it had a pull to the right. I put it on the hunter alignment machine yesterday in shop class and everything was in spec EXCEPT for caster. My front right Is off by almost negative 2 degrees and is non adjustable. Would that mean my control arm is bent?
15 mph is enough to bend parts. back in my "wrench turning days", we could adjust caster to some degree to compensate. but now parts replacements are in order.
 
1 - 6 of 6 Posts
Top