Toyota Nation Forum banner
1 - 10 of 10 Posts

·
Me 'n' Little Blue
1993 Corolla DX
Joined
·
138 Posts
Discussion Starter · #1 · (Edited)
Hello everyone, I have a 1993 Toyota Corolla DX... Almost a classic! when the month of April rolls around, just so it is entirely legitimate .
AS some of you know there are the handle type winding windows which I am sure all of you love.:disappoin
I was thinking about installing power windows
or at least the substitute of getting converter power windows here.

>>>http://megabrandonline.com/Conversion-Power-Electric-Universal-Kit-w-7-Swithches-Car-Auto-32CWK002-4DR-06.htm<<<

The actual picture of the motors
>>>http://ecx.images-amazon.com/images/I/41KM8YRyrlL.jpg<<<

Which I would like for the most part. Just the problem that I am not very
insightful on powering anything like this, I know drown me.. But I am learning.

For the most part I am just an avid high school kid that wants to do the
most of what he has. And for this reason I would like to ask those who
have had some experience with this sort of installation or swap. Any
information that could help would be delightful.

:thanks:
 

·
Me 'n' Little Blue
1993 Corolla DX
Joined
·
138 Posts
Discussion Starter · #9 ·
power windows need power, power is carried on wires. As far as I can remember the wiring was present in the doors for the motors and switches even if you lack power windows.
Nothing like that was found, sir. I was looking at some other threads concerning their swap, some had a plastic computer that was supposed to be present on the driver side under all the front console parts. I looked there as well but I found nothing of the sort. Which for me means I will have to siphon power from the fuse box with an aftermarket set of motors.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top