[DrewsCam]

just put on and fitted my cf hood, problem is it doesnt shut all the way

everything clears just it doesnt have enuff weight to push the latch part down to secure it

any help??

please asap

 

[DrewsCam]

no help, ill post up soem pics shortly

 

[Phi]

can't you just use your hand to press the hood down? Otherwise, just use your hoodpins to secure it. You did get hoodpins right?

 

[DrewsCam]

i pressed, i sat on it, had my dad try nothing

just not enuff to push it down

hood pins i have but the body shop has been F*cking around never called me back so i got pissed and decided to do it myself

im gonna go upload the pics now

 

[Phi]

I'm confused. You're refering to that latch at the front of the hood right? The latch is spring loaded and shouldn't require much effort to realease. Certainly you hand should be more than enough. You'd better start buying Wheaties dude!

 

[MRQtwinturbo]

if it doesn't latch properly..i strongly advise u get those hood pins installed ASAP.......

 

[2wickedtoyz]

use a hammer

j/k check to see if the latch is working properly and that it isn't closed while you are trying to put the hood on

 

[DrewsCam]

the latch goes its the part that locks it, i took a pic opf the lock

also the hood isnt on i took it off i aint stupid

here are the pics

see how high up it is, aboev the grill lights etc

u see im talking about the part the goes down, nto what you unhook with your finger under the hood

 

[Phi]

can you manually pry and unlatch it with a screwdriver?

 

[DrewsCam]

u can but its freakin hard, plus very hard to get to i can only push that down with hood open, plus id have to do that every time

 

[Phi]

okay. I'm stumped. This just happened all of a sudden?

 

[DrewsCam]

no, stock hood fine, just i tried to put on the cf hood cause body shop never got back to me if i could bring it in or not

im gonna have to bring it in

just the hood isnt heavy to push down that latch and lock into place

its only held by the lil hook that you undo with ur finger when ur at the hood about to open it

i wish a gen 4 on this page with a cf hood would see this

 

[DrewsCam]

bump, any advice, eurocam cant you help me out?

 

[ECT ON PWR]

this happen to me. you will need to take off the two springs that hold up your hood, its too strong even if it closes your hood will pop up into a wired shape because of the strenght of the springs.

seccond i had to cut off two safty brakets close to the windshield, after i did those the hood was fine.

 

[DrewsCam]

pics please or more detail??

i just adjusted the black thingys near the headlights, i got them to move down

 

[ECT ON PWR]

did u take off your spring arms that hold up the hood?.