[Monkey123]

I have a 1995 camry coupe LE. I'm changing the transmission by pulling the engine with the transmission in place. Rack and pinion is leaking from the tube assembly. Toyota part number is 44410-06060 and the price is $229.88. Can someone guide me to an after market tube assembly? If I can not find a replacement, I will buy an new line and bend it just like the brake line. Thank you for the help.

 

[original_nutcase]

I have a 1995 camry coupe LE. I'm changing the transmission by pulling the engine with the transmission in place. Rack and pinion is leaking from the tube assembly. Toyota part number is 44410-06060 and the price is $229.88. Can someone guide me to an after market tube assembly? If I can not find a replacement, I will buy an new line and bend it just like the brake line. Thank you for the help.

Is that high pressure hose? any autopart store will have it.
Is that hose from rack to powersteering pump?

 

[mcgowaw]

its on ebay for 36 bucks
tony

 

[original_nutcase]

If you are doing the high pressure hose then I recommend you get Toyota OEM crush washers, the toyota OEM are easier to install.. The ones that come in bag are hard to install.

 

[Kingdom934]

You can check with one of our TN vendors. Send him a PM or make a message in the sub forms if you have questions. @ToyotaOfCoolSprings

http://www.toyotanation.com/forum/506-toyota-cool-springs/

http://parts.toyotaofcoolsprings.com/oe-toyota/4441006060


The part number 4441006060 looks like the high pressure hose for the 5SFE setup (power steering pump to rack). I've had good luck with the Gates in my 98 V6 and 95 V6 Camry. I had some issues with the gates high pressure house in my 04 V6.

If you do go with aftermarket, I'm not sure if the toyota single washer thing (above) will work though. OEM hose will work with the toyota single washer though.