[Frank20]

Does anybody know if it is the same bulb for a 2003 camry and if you install it the same way becuase im looking to do this as well.

 

[AmanO]

I have a 4th gen and the bulbs went in tight for me.

 

[Netforcer]

Even though this is really late, I finally got my camera back from repair, so I can put up the install pics now

Center console area

Now grab the pillars and pull out

Open the cupholder and pull at the corner shown. Pull straight up.

Set the plastic so the bulb is exposed.

Twist the black base (with a plier if needed) and take the bulb out...

Install everything in the reverse order and you should be set. enjoy and sorry again for the lateness.

 

[whitenoize]

Thanks for the instruction pics, Netforcer.

I think another challenge would be to modify the brake light LEDS.
I really don't care for how spaced apart the LEDS are.
I am curious if it would be possible to drill additional holes in the housing and adding more LEDS to it.?.?.

Any suggestions?

 

[BigWillie]

When I checked out my shifter console light, it had a green colored sleeeve over the bulb. Is this consistent with everyone else?

 

[whitenoize]

Yes, mine did too.
The replacement LEDs are brighter than the bulb if you pulled the sleeve off though.

I am happy with the minor change it makes having the white LED.

 

[dna59]

I liked the blue better, but then again it's u'r car. Then white does look nice too though.

 

[Netforcer]

whitenoize... it is a good idea about the led third brake light... i think it is possible to build a bracket and drill holes to fit LED's

The easiest thing to do would be to get the hybrid third brake lights cuz they are LED's

 

[Wizrd23]

you know, I consider myself a pretty smart individual, but for the life of me, I can't understand that SuperbrightLEDs.com website! lol.

What section do you find the T1.5 instrument LED bulbs? Or better yet, will someone post a direct link?! thanks

 

[Wizrd23]

forget it... I found it. Its not organized very well... lol... where is the search box so I can type in #74, or "instrument LEDS". Maybe its just me, but how am I suppose to know that it would be under miniature wedge based LEDS? geez :wtf:


**EDIT**
Lemme guess.. before everyone points it out to me... everyone else knew about the Sylvania website that lists all the different lighting applications for the Camry right? I'm learning!
http://www.sylvania.com/ConsumerProducts/AutomotiveLighting/LampReplacementGuide/AutoLRG-Results.htm

 

[socaltyger]

here's the direct link:

http://www.superbrightleds.com/cgi-bin/store/commerce.cgi?product=CAR&next=50

it has both the shifter "74" bare LED bulb.. as well as the WLED-x6LED wedge bulb(194/168 type) for the doors, map light.. etc.

 

[Wizrd23]

I asked this in another thread, but specifically to Netforcer or socaltyger or someone who has replaced all the interior bulbs... can you post a list of the actual model numbers from SuperBrightLEDs of what we need to order to replace the following: (found on sylvania site)
License plate
2825

Glove box
37

Map light
2825

Dome light
DE3175

Step/Courtesy light
168

Trunk/Cargo area
194

 

[IsleofJD]

is the bulb the "B8.3D Instrument Cluster LED bulb"

 

[Bahraini_Zupra]

DUDE thats very awsome mod !

I really wanna know how to convert my interior and gear shifter on my new avalon into PURE WHITE LED !
Please let me know how to do it !

greatly appreciated !

 

[Explicitstylz96]

netforcer...I would like to thank you for the pics you put up. Because of you, I went and switched out all the bulbs (minus the glove compartment and trunk). I got the white LEDs and they look awesome! The only thing I saw was that the dome light was a little dim. I read that you suggested the next size up (6 or 9 leds) and I did that. Its still kind of dim but it looks sweet!

 

[Epsilon]

DUDE thats very awsome mod !

I really wanna know how to convert my interior and gear shifter on my new avalon into PURE WHITE LED !
Please let me know how to do it !

greatly appreciated !

http://www.cardomain.com/ride/2379023/4

BTW, great write-up on the cupholder LED mod, I've been meaning to do it but haven't gotten around to it yet.

 

[trdsupragt]

Hey Netforcer, can you get the pictures back up? They don't seem to show up for me.

 

[rsjyss]

Hey Netforcer, can you get the pictures back up? They don't seem to show up for me.

Netforcer was nice enough to email me the direct links awhile back..... so here you go:

http://i55.photobucket.com/albums/g124/Netforcer/camry/P7170034.jpg

http://i55.photobucket.com/albums/g124/Netforcer/camry/P7170035.jpg

http://i55.photobucket.com/albums/g124/Netforcer/camry/P7170036.jpg

http://i55.photobucket.com/albums/g124/Netforcer/camry/P7170037.jpg

http://i55.photobucket.com/albums/g124/Netforcer/camry/P7170039.jpg

 

[07 SE]

Excuse me gentle men and please forgive my ignorance, but this is my first post here, though I've tried to piece together the info. I'm looking for; I have a few last questions.....

RE: an 07 SE w/ sunroof....

http://www.superbrightleds.com/cgi-b...ct=CAR&next=50http://http://www.superbrightleds.com/cgi-bin/store/commerce.cgi?product=CAR&next=50

Which LED is right for the map lights and door lights :

WLED 6-LED bulb
12 VDC 6-LED Wedge Base bulb (194/168 type)
Non Polarized
$ 2.79

or

T13 Wedge Base LED bulb
12VDC 6-LED Wedge Base bulb
measure 1 1/8 long by 1/2 inch maximum diameter (194/168 type)
Available in White, Blue, Green, Red, Amber and UV-BlackLight LED
$ 1.99

Is this the correct shifter LED?

74 Wedge Base LED bulb
Small Wedge Base LED bulb (74 type)
3/16 inch wide base, 13/16 inch overall length
Flat tipped LED produces wide beam angle
$ 1.19

 

[Netforcer]

Shifter light is correct just make sure you get the color you want

WLED 6-LED bulb for the map and door lights... you could've just PM'd me