Toyota Nation Forum banner

shifting

600 Views 2 Replies 0 Participants Last post by  93toy4x4
G
mostly when i go from 1st to 2nd or when i downshift to second it is real
rough and hard to get in gear. It acts like something is in the way but i
dont know what it is or what to do.....any suggestions?
1 - 3 of 3 Posts
G
There is a dark green plastic/nylon spacer or washer at bottom end of you
shifter - they frequently breack and move around causing shifting difficulty
and even popping out of gear. There as a detailed article on line at the
Toyota 4x4 or off road site but I couldn't locate it. Take shift boot off,
remove 4 bolts and shifter and you'll see it at end of shifter stick.


"93toy4x4" <[email protected]> wrote in message
news:[email protected].
> mostly when i go from 1st to 2nd or when i downshift to second it is real
> rough and hard to get in gear. It acts like something is in the way but i
> dont know what it is or what to do.....any suggestions?
>
>
See less See more
G
Igot it off and see the green plastic peice i made new holes in it and fit
it up. It doesnt seem like it was in the way but should i get a complete
new one or just rig it like i did.....or could it be something else?
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top