Toyota Nation Forum banner

Spark Plug wires melted

3745 Views 2 Replies 3 Participants Last post by  AliRazoR
hi guys ive searched this forum and searched google on a solution on this issue. Long story short my girlfriends camry overheated and motor started running really rough. so i got it home and pulled the spark plug wires out and cylinder 2, 3, 4 wires were stuck on the plug. twisted it and that still did not work. So i pulled as hard as i could and i found out the boot and some plastic from the wire melted on the plug. i got most of the plastic off but there is still the boot in there and cant get it out. I tried long needle nose pliers and it wont budge. has anyone had this issue before and if so what did you do to get them out?? This is driving me crazy. sombody hellllllpp me.
1 - 3 of 3 Posts
Well.... Probably, it is not worth of the efforts anymore...

4 cyl or 6 cyl? On 5sfe you can twist out spark plug tubes, as far as I know. Need to remove valve cover first (anyway, you are going to do it, right?)
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top