Toyota Nation Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
OK i am looking for a decent setup no to expensive, i have a pair of clarion 6x9' was thinking about putting in front doors and need advice if they will fit ect. also what do i need to back doors, this is a dbl cab
 

·
Taco Salad!!
2007 Tacoma DC LB
Joined
·
552 Posts
^^^ +1...that about sums it all up right there....

Anyway...you will need adapters F & R...fronts can have adapters for 6.5" and 6x9", rears will be 6.5". If you want the best sound, get a set of components for the front, and either no speakers or coaxials for the rear. This is your best bet. And, if you are going to run off head unit power, you will NEED high sensitivity speakers, if not, and you are going to amp, then you dont need to be as picky about that.

I have Polk db6501 components in the front, and db 651 coax in the rear, fronts amped with 75W RMS, and it sounds great. The rears are running off head unit power. Hope I could help!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top