[93 toyota]

so i just got my 4 inch suspension lift from rough country in the mail yesturday. i plan on putting the lift on during February vacation all i need left to buy are some wheel spacers to clear the 3.75 backspacing. i will run the current 33's on the truck until i have enough money for some 35's and new gears
anyways i know how much everyone loves pictures so here you go.

and here is another toy i got yesterday. its a 10 ton hydro. pump tube bender

 

[payo360]

good luck with the lift.. it should turn out fine.

 

[93_22re]

how much did you pay for it??

 

[MIC0417]

Probably 600$

:thumbdown To the blocks

:thumbup::thumbup:To the lift overall

:thumbup::thumbup::thumbup:To new gears and tires

 

[93 toyota]

no worries
blocks will be swapped out for 4 inch springs once the gears and tires come

 

[MIC0417]

no worries
blocks will be swapped out for 4 inch springs once the gears and tires come

:thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup:

P.S. send me your old shocks :clap:

 

[Jayota]

Nice! gonna be pretty big. Hopfally the bracket lift will stand up to abuse. Install now!

 

[93 toyota]

alright boys, here we go.

we are breaking ground 8 a.m. sharp tomorrow morning. pics will be taken as much as possible but if we get going i can't promise anything

update will be tomorrow night

-drew

 

[93 toyota]

started bright and early on the truck ...well after some fucking around with some shit and what not. was going great until we hit the damn LCA bushings. only the rear ones gave us trouble though. the two front ones were mint but i drove over to tarbox toyota and dropped fucking 121 dollars on two new bushings and cam bolts. coming in 7 a.m. tomorrow morning so hopefully it will be all set tomorrow after noon. just have to mount up the diff. drop the sway bar. add the new crossmember. and pretty much just bolt shit up. we haven't touched the rear but knock on wood it should be fine. tomorrow will be another update. here are some pics.

 

[Jayota]

Hope it all comes together good. I just finished swapping out my front diff. What a PAIN IN THE ASS!!

 

[93 toyota]

haha i know EXACTLY what you mean.

all i know is that i will DEFFINITLY have the biggest truck in school after this lift :smokin:

just wait till i fab up the bumpers and rock sliders :clap:

 

[MIC0417]

Any luck getting some pics of the progress?

 

[93 toyota]

update:

the truck is almost there. we got all the knuckles done but when it came to the drivers side LCA ball joint , we stripped the damn castle nut. so toyota didn't have it nor did napa. autozone has a new ball joint with the nut for 37 bucks so after work tomorrow we will pick up the ball joint and hopefully with any luck, finish the damn thing and go bring her home. i just got home from work so im mad tired. ill give a better write up tomorrow but here are some pics for now...

 

[MIC0417]

Nice, she's looking good.

 

[rivethed]

Question, I did not see the diff drop brackets in your kit, are they missing, or did you them in your photo op????? should be 2, one for each of the rearward diff mount.

Good job though. Reminds me of my Procomp lift install a few years back.

 

[93 toyota]

yerah i got them. there were actually three in the kit.

 

[93 toyota]

day 3 done and still no finished truck haha

got the front all done except for the sway bar and the shocks assembled... which might be a bitch becuase it looks like they gave us the wrong bushings... fuck heads. the rear was also a bitch and thats where we left off. 2 of the 8 lock nuts on the u-bolts want to lock too much and wont even spin with a 1300fpt snap-on impact gun. just have to fix those and get the truck allignened . so we shall see what happens tomorrow im beat and don't have much energy today so i really didn't feel like dealing with all the bull shit .

here are the pics

and this is how we all felt after 3 hours of being under the truck.... fuck that shit and give me a damn beer!

 

[Jayota]

Damn, shes lookin good! Looks good with the 33's Time for some armor!

 

[93_22re]

i dont know, might need some 35s, you gotta a v6 or a 22re, what gears you running

 

[93_22re]

I see the v6 emblem now, but what gears are you running???