Toyota Nation Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
142 Posts
Discussion Starter · #1 ·
whenever i come to a stop or accelerate from a standstill, i hear a noise from the suspension. i dunno wut it is so is this something i should be worried about?
 

·
Sweet n' Lowdown
2006 Scion tC
Joined
·
16,189 Posts
...if its a bit more of a clunk then its an endlink.


I would think the strut mount would click more when the wheels are being turned because the berings are smashed or missing but a clunk when accelerating or stopping would be an endlink.

Does it happen over bumps? Can you isolate a regon, i.e. one corner of the car from which the noise is originating?
 

·
Gen 4 XLE v6
02 Toy Solara V6 MT
Joined
·
3,192 Posts
BLUEMEANIE said:
..I would think the strut mount would click more when the wheels are being turned because the berings are smashed or missing but a clunk when accelerating or stopping would be an endlink.

Not really, the gen 4 strut mount problem persists (and is audible) at low speeds...starting/stopping at traffic lights, and such...NOT while turning or going over 20 mph.
 

·
Registered
Joined
·
142 Posts
Discussion Starter · #10 ·
it neither a clunk or a clickin noise. it sounds like something is rubbin on something.
 

·
Sweet n' Lowdown
2006 Scion tC
Joined
·
16,189 Posts
Admiral said:
i have a clunck noise in mine too when i come off a speed bump or other bumps in the road on the front drivers side. Whats that coming from? it has a new strut/spring/and mount:confused:
Admiral, yours is definatly a endlink bushing.
Its where the endlink connects to the swaybar or the strut.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top