Toyota Nation Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have a 95 t-100 and bought a 98 t-100 rollover for a engine swap (and other parts). I am wondering if the sensors, plugs and wiring would be the same for the engine swap or am I going to run into troubles? Thanks
 

·
Moderator
1998 T100 SR5 2WD
Joined
·
14,845 Posts
Best thing to do is either let someone professional do the swap or you can pull the electrical manual/schematics fer both years and do the line by line comparisons... ;)

Guess it will depend on whether you have the money or the time. You should be able to check the wiring harness and sensors along the way.
 

·
MakanaMaiKaLani
Toyota T100
Joined
·
36 Posts
the 95 and 98 ecu is different. if you swap the engine hope you have the ecu with it too. I have a 98 T100 5 speed 4x4 ecu if you need one. I pulled it out because I decided to run a stand alone because i put in supra injectors, 255 walbro full pump and a supercharger. so i redid the whole wiring harness for that. lots of work, but fun to do.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top