Transmission and transfer case help

970 Views 1 Reply 2 Participants Last post by reb, Aug 14, 2004

Sampson

Discussion Starter · Aug 13, 2004

I just bought a transmission and transfer case to replace the ones of mine that went to shiat. They are for a 22R carburated out of an 82. I need to know if there is supposed to be a gasket that goes between the transmission and the transfer case. I am not sure if there is one as I have never take the two pieces apart. Please let me know asap. If I do need one does anyone have one for sale or know where I could get one as Westbay, Shucks, Autozone and Napa had no idea if that part even existed let alone had one I could buy. THanks a lot for the help-Sampson

Save

1 - 2 of 2 Posts

reb

· #2 · Aug 14, 2004

The '85 shop manual seems to indicate a gasket is required there. If you can't find a new one, you can get gasket material and make your own. A tube of silicone gasket material might be adequate, too. Good luck.

Save

1 - 2 of 2 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month