[tacof0b]

Has anyone purchased the front billet grill for 2005+ Tacoma by Trenz. I'm not so certain, but I'm looking for the one that has a middle section cutout/hole for the Toyota logo/emblem. I checked everywhere online and the only place I found was on this link.

http://www.autoanything.com/products/product_mv.aspx?p_id=2315&se=trenz_bumper_grilles

Thank you.

 

[DMC]

Has anyone purchased the front billet grill for 2005+ Tacoma by Trenz. I'm not so certain, but I'm looking for the one that has a middle section cutout/hole for the Toyota logo/emblem. I checked everywhere online and the only place I found was on this link.

http://www.autoanything.com/products/product_mv.aspx?p_id=2315&se=trenz_bumper_grilles

Thank you.

I don't have any answers for you, but I'm hoping you buy it. Good luck with that. Snap some pics if you do decide to get it!

 

[basshead760]

I put on a TRex billet grille insert and two side vent covers. But here is a link for the one you want. You can get to it from http://www.sportruck.com and down towards the bottom it says shop online. Here is the direct link: http://www.truckshop.com/home.php?cat=547&sort=orderby&sort_direction=0&page=2

Hope this helps. Price isn't too bad either.

 

[tacof0b]

Basshead,

Do you have a pic of your Tac with the Trenz grille? Does your grille show the Toyota logo? I'm wondering now if that's an extra item to install.

 

[basshead760]

Sorry I didn't make it clear, I have a T Rex billet main grille insert with the 2 side pieces. By the looks and description of the Trenz you want, They call it a bolt over. So I would assume there is no cutting of your OEM grille. The Trenz just "bolts" on and the existing Toyota logo fits through. I currently have mine without the emblem until I can find a way to secure it.

[/URL][/IMG]

[/URL][/IMG]

 

[sctrd]

I picked up a a Trenz billet grille and yes it does have the hole cut out already for the emblem. It's a fast easy installation and looks pretty cool. :clap:

 

[tacof0b]

Nice! Can you post a picture of it please? And if you have the part item number and other info that will be great (where it was purchased). I believe Basshead is right that it is the bolt over kind. Thanks a lot. :whatwhat:

 

[AdrenaliNate]

I currently have mine without the emblem until I can find a way to secure it.

If you're looking for a way to secure your emblem to a T Rex grille check out my Cardomain site. I've had it this way for months and never had a problem with it loosening up.

 

[basshead760]

WAY OFF TOPIC.........
Adrenalinate, Damn Fine work. You've just inspired me to do a few mods on my taco. The Bed lights are awesome. There has been a few occasions where I finish installing someone's plasma late and I have a hell of a time cramming everything back into the back of my truck. Bed compartments and Bed extender locks are great. Just might do the DTRlight mod today. Thanks for the emblem fix.

 

[tacof0b]

I saw your pics at cardomain.com. Pretty cool! I like the "TRD" 3rd brake light you put. Like to add that on mine, did u make that yourself too or was it purchased?

 

[tacof0b]

sctrd, can you give me more info of your Trenz grill. I think this is the item that I'm looking for. If you still have the Trenz item number, that will be great (pics too, if available). Thanks.

 

[AdrenaliNate]

I saw your pics at cardomain.com. Pretty cool! I like the "TRD" 3rd brake light you put. Like to add that on mine, did u make that yourself too or was it purchased?

Sorry about hijacking this Trenz thread, but I should say that few of my mods are original. Most were adapted from others' but sometimes with my own style. As for the TRD 3rd light cover, check out eBay. Search "tacoma brake light cover" and ask any of the vendors if they can design the "TRD". Most will. The cover is a vinyl sticker.

 

[Revans310]

tacof0b did you ever get a reply from sctrd...I have the same question.

 

[Bigblue]

tacof0b did you ever get a reply from sctrd...I have the same question.

yeah, he must not be on here very often. I PM'd him yesterday with the same question. Still no reply. Dude, where ya at.

 

[Bigblue]

tacof0b did you ever get a reply from sctrd...I have the same question.

yeah, he must not be on here very often. I PM'd him yesterday with the same question. Still no reply. Dude, where ya at. You've got people here waiting for valuable information. :lol:

 

[sctrd]

Sorry guys, Didnt have the time to get back and read the forum..The trenz grille is PN. 2756TFPP and it is a framed perimeter billet grille..The only drilling you do is the 2 triangle pieces that come with it..Its does require you to drille two 3/8 holes per piece to insert it..The main grille slides over the original grille and is held in place by 4 inserts and locking pins..Its might take all about 10 minutes to do the main grille install..Looks so cool ...Sorry about not posting a pic,but my dig camera is on the blink..Ill see if I can some pics real soon..:clap:

 

[Revans310]

sctrd could I get a link...thx

 

[sctrd]

Go to trenz.com and click on find a dealer and enter your zip code..Its should give you the nearest place that sells it..I also seen some places that sell it and ships free within the US..I had to go through a local trenz dealer to get it shipped free to Hawaii..

 

[tacof0b]

Yahoo!!! Thanks for replying back, sctrd. I was pretty sure that the part # was 2756-TFPP and thank you for confirming it. Now I can go order the part.

 

[tacof0b]

sctrd, did you say that the two triangular vent grilles come with the 2756-TFPP? If so, that's great! This item is priced higher than other grille brands...if the small vent grilles come with it, then that's probably why.

You didn't purchase those separately, did you?