Toyota Nation Forum banner

Trouble Removing Blower

946 Views 1 Reply 1 Participant Last post by  b the s
Trying to replace the blower motor but the studs that hold the blower box to the firewall under the hood are turning with the nuts! :headbang: Don't know what to do now. :confused: Any advice?

:Bruce:<< Bruce the cat?

1 - 2 of 2 Posts

Have 8 of 10 nuts off. +1 I broke the stud off. And that leaves the one that's on the bottom right. It's been chewed at so much now that my next step is a dremel.

I guess I'll JB Weld the studs to stop them turning when I put 'er back together.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.