Toyota Nation Forum banner
1 - 11 of 11 Posts

· Registered
Joined
·
58 Posts
Discussion Starter · #1 · (Edited)
So I'm driving and i go to speed up to make it though a yellow, and after i let off the gas since i make it,my RPM's go from around 3k, to 0 and all the lights turn on and i roll to a stop, I try starting the truck, The Engine turns on, but its Idling around 100-200 RPM's... I give it gas, Rev's up to 2k, drops back to 800 rpm's and idles normally... I drive away..

Thats the 2nd time its done that to me. I'm guessing its a problem that needs to be fixed and its going to be happening more frequent.

. Any idea's?:confused::confused::confused:

p.s. Yes its automatic
 

· Old ******* Type
2000 Taco Prerunner
Joined
·
186 Posts
My Ideas............

Crappy Gas?
Water in the Tank?
Airlocked Gas line?
Air filter needing a Change?

Seafoam!
Did I mention Seafoam?

Move along....Nothing to see here............
 

· Old ******* Type
2000 Taco Prerunner
Joined
·
186 Posts
You dont have a brake booster hose?

Try that one. If not...i dunno.........
 

· Registered
2000 Tacoma TRD SR5
Joined
·
226 Posts
could be the idle stabilizer valve if these trucks have them. That was the problem i had with my porsche - everytime i would brake hard to stop she would let the rpms drop to 0 not 1000 like it was supposed to. I swapped it out and viola she is great now.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top